I've had the rig for 3 months. We've done (3) two-week trips in it so far. I use the ladder to get on the roof and clear the slide-out before packing up the site. Last week I climbed up, and the screws started ripping out of the side. I'm a pretty slender guy at 170 pounds so I'm a little disappointed to say the least. What's the best way to repair?
Announcement
Collapse
No announcement yet.
2021 24 MPR - Ladder screws ripping out
Collapse
X
-
You may need to go up 1 screw size. If they are #8 go to #10. Put silicone in the hole before putting the screw in BY HAND. Silicone helps with leak prevention, Hand Install prevents stripping the wood formed threads.Joseph
Tow Vehicle: 2024 GMC K3500 Denali Ultimate Diesel
Coach: 303RLS Delivered March 5, 2021
South of Houston Texas
- Likes 3
-
Agree with everything Llawles2 says. all 3 of our trailers that had ladders required a screw upgrade from the stock size mostly due to overtorquing during the install. The dab of silicone is vital since most of the sealants I have seen used from the factories are inadequate.2021 Reflection 337RLS, 2021 Silverado 3500HD 6.6 gas. Nellie the wonder boxer
Comment
Comment