Update
I got the door finished and touched up the paint messed up by my mistake of not taping everything off. The foam adheres strongly to everything, including the rubber seal, so be sure you tape it off too. The voids created by the https://blasterproducts.com/product/...e-with-teflon/ were significant as it took almost the entire can to fill them. That's the reason for all the holes and plugs. I started at the bottom and worked up.
Large dent/void below lock now filled.
Door jam painted and plugs installed. Door operates normally.
On to the next project and trailer winterizing.
Keith
I got the door finished and touched up the paint messed up by my mistake of not taping everything off. The foam adheres strongly to everything, including the rubber seal, so be sure you tape it off too. The voids created by the https://blasterproducts.com/product/...e-with-teflon/ were significant as it took almost the entire can to fill them. That's the reason for all the holes and plugs. I started at the bottom and worked up.
Large dent/void below lock now filled.
Door jam painted and plugs installed. Door operates normally.
On to the next project and trailer winterizing.
Keith
Comment