Tweet
When we got home from purchasing our camper 500 miles away one side of the window shade was hanging. The shade snaps into a clip on each side. The screw holding the clip had fallen out of the window valance. I figured out how to release the blind from the clips to take it entirely out. There isn't much to screw into at the top of the valance, maybe 1/4". I reinstalled the clip but am having trouble snapping the blind back into either side. The window is about four feet wide. I would think there should be another clip in the middle but there wasn't. Anyone have any ideas how to a) make the top beefier to accept a longer screw, b) trick to snapping the blind back into the clips, c) have a better clip system. Thanks!
- Disclaimer: In general, this forum is intended to be a place for Grand Design owners to gather and exchange ideas regarding their use of and experiences with Grand Design products. Any information contained in the forum should be independently verified by checking with Grand Design, one of its authorized dealers, or reviewing your owner’s manual. If this is your first visit, be sure to check out the FAQ by clicking the link above. You will need to to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. Thanks for visiting and your interest in Grand Design!