We've had our 2600rb for about 4 1/2 months. When we got home from our last trip and was unpacking we noticed the trim wood on the door frame for the bedroom was warped out. It was tight to the ceiling and floor which told me the trim piece was cut a little too long and the construction adhesive had let go of its grip. This is a side view where can see it bulging out from the door frame
I carefully pried it off the frame from the warp down to the floor and removed the old construction adhesive. As you can now clearly see it was cut too long.
I cut a little strip off the bottom and now it sits flush like it should.
I used Gorilla Glue Heavy Duty Construction Adhesive to reattach it to the door frame and we're good to go.
I carefully pried it off the frame from the warp down to the floor and removed the old construction adhesive. As you can now clearly see it was cut too long.
I cut a little strip off the bottom and now it sits flush like it should.
I used Gorilla Glue Heavy Duty Construction Adhesive to reattach it to the door frame and we're good to go.