Pass locks and latches

[BillinTexas]

How can I find the correct size for the locks and latches on my pass-through storage doors? Transcend 221RB thanks.

[TucsonJim]

How can I find the correct size for the locks and latches on my pass-through storage doors? Transcend 221RB thanks.

There should be a number stamped on the key and the lock.

[BillinTexas]

Jim, I'm not sure what the number means. Perhaps I should have stated my inquiry better. I'm wanting to change these out and I see all types of fractions, which I assume have to do with the thickness of the door when looking for them.

[Country Campers]

Jim, I'm not sure what the number means. Perhaps I should have stated my inquiry better. I'm wanting to change these out and I see all types of fractions, which I assume have to do with the thickness of the door when looking for them.

If you remove the lock and measure the threaded portion , from the flange that seats on the outside of the door to the end where the latch attaches , this will give you the length you will need. The diameter of the threaded portion is the other size you will need. You should have dimensions like 3/4" diameter , 7/8" long.

Brian

[BillinTexas]

Thanks very much.

[cvretis]

I got these locks as replacements.Two locks on each side with just one turn tab in the middle. Got a lot of expensive batteries and stuff down there.
https://www.ultimatesecuritydevices....ks_c_1394.html

[J & J Bumblebee]

I got these at Home Depot. I spotted two packages with the same key number. works great. https://www.homedepot.com/p/Prime-Li...9943/100124186

[Yoda]

How can I find the correct size for the locks and latches on my pass-through storage doors? Transcend 221RB thanks.

These folks can also help https://www.rvlocksandmore.com/

They can also key the locks the same as your door key.

[BillinTexas]

I replaced these a good while back with the round type key that works very well. I also replaced the OEM door latch with a Carmtech which we are very happy with.