Hi everyone, hope all of you are good and staying healthy. If someone could go be so kind and measure their dinette table support bracket I would appreciate it! I’m looking for the height from the floor to top of bracket or underside of table and also how far is sticks out from the wall. I’m in the process of of building a desks for our computer/workstation. Mine is in storage so I can’t do it at this time.Thanks!
Announcement
Collapse
No announcement yet.
‘19 310 gk
Collapse
X
-
Two inches deep by 2.5 inches wide. Two brackets 15 5/8 inch outside to outside. 25 1/4 inch to base of top, 29 inches to top.
Curved top of metal brace on wall starts at 23 1/2 inches. Curve extends to 4 inches.
Crespro2021 Solitude 310 GK-R. 2020 F-250LB, 7.3L, 4.30, Reese 27K
-
Originally posted by Crespro View PostTwo inches deep by 2.5 inches wide. Two brackets 15 5/8 inch outside to outside. 25 1/4 inch to base of top, 29 inches to top.
Curved top of metal brace on wall starts at 23 1/2 inches. Curve extends to 4 inches.
Crespro
Comment
-
Originally posted by Crespro View PostTwo inches deep by 2.5 inches wide. Two brackets 15 5/8 inch outside to outside. 25 1/4 inch to base of top, 29 inches to top.
Curved top of metal brace on wall starts at 23 1/2 inches. Curve extends to 4 inches.
Crespro
Comment
-
Top of metal brace is 27 1/2 inches. 3/4 inch board on top of metal brace extends about 28 1/2 inches from wall. 3/4 inch top. Total about 29 inches from floor for 27.5 plus 0.75 plus 0.75.
Crespro2021 Solitude 310 GK-R. 2020 F-250LB, 7.3L, 4.30, Reese 27K
Comment
Comment