Tweet
We've got a '22 Momentum 395MS and I'd like to mount a couple of towel racks behind the toilet. The wall curves around behind the toilet to the sliding door in the bedroom but I think that wall material is paper thin. Any ideas on how to anchor a towel rack? For small towels I have good luck with the Command hooks available at ACE hdwe etc. But this is a bath towel or two.
-
-
The wall material is typically 3/16” luan plywood with a wallpaper covering. “Wingback” fasteners typically work well. Command strip fasteners have been known to pull the wallpaper off the luan plywood. The bond between the Command strip and the wallpaper is greater than the bond between the wallpaper and the luan.
RobCate & Rob
(with Border Collies Molly & Angel + Kitties Hazel & Elsie)
2015 Reflection 303RLS
2022 F350 Diesel CC SB SRW Lariat
Bayham, Ontario, Canada -
Tap on the wall and see if there is any solid sounds or use a stud finder to see if there is any structure there that you could use screws for anchoring the towel rack.
BrianBrian & Michelle
2018 Reflection 29RS
2022 Chevy 3500HDComment
-
These work and are still holding. A trick I learned is slightly undersized the hole before installation.
2018 Reflection 150 Series 220RK 5th whee, Star White 2022 F350 King Ranch CC Long bed (HAL) (CCC 4062lbs), B&W 25K OEM Companion,. SteadyFast system, Trailer reverse lights, rear receiver spare tire holder, storage tube, sumo springs, Victron MultiPlus 12/120/3000, Solar, Custom 6K axles upgrade, and other modifications.Comment
Comment