I have now re-calibrated our LIppert Leveling system 4 times and it still does not work. We have a 2020 31MB Refelctioin 5th wheel. When we arrive at a location, the first thing we do is to break out our 24" level and check the level side to side. We calculate how many of teh Camco leveling block we need to make us level side to side. After that has been set, we make certain the front jack have teh same number holes showing on both sides, in this case "8". Next we put enough Camco leveling block under each of the front pads so that there in about 1" to 2" of space. Depending on the ground, one side may have one addtional Camco block to make up for the uneven ground. Next we go to the back Lippert leveling jacks and do the same thing. We start the Auto Leveling system and all seems to go good, then all of a sudden, the front jacks keep going and typlically the right side wheels start going off the ground and we stop the system. I put in it manual mode, bring everything back down, leveling it manually. Then turn off the Lippert system, push the front button 5 times, rear button 5 times, then it re-calibrates, and select enter. I tray it again, same thing happens. I am at a loss.
Tony
Tony
Comment