Tweet
The MaxxAir fan I'd installed in the bathroom quit working. Wouldn't respond to the remote or to the controls on the unit itself. The only indication was a green light (depicted with a green dot in the picture below) which, according to the instructions, means the fan has entered "Auto Mode". I didn't press the AUTO function, so I have no idea how it entered that mode.
I tried pressing the ON/OFF key as instructed in the manual--no joy.
What fixed it was pulling the "Bath" fuse and then, after about a ten count, reinstalling the fuse. (Got a nice spark since I didn't turn power off!) Fan worked as normal. Very odd.
Simple enough troubleshooting, but posting in the hope it helps someone in the future.
Howard
I tried pressing the ON/OFF key as instructed in the manual--no joy.
What fixed it was pulling the "Bath" fuse and then, after about a ten count, reinstalling the fuse. (Got a nice spark since I didn't turn power off!) Fan worked as normal. Very odd.
Simple enough troubleshooting, but posting in the hope it helps someone in the future.
Howard