Securing Washer and dryer

[dmjackson76]

I have a 2018 360RL-R Solitude that we bought new and had a stackable washer and dryer installed in it. From day one it would shke like crazy when running the washer. I bought a tripod to go under the goosebox hitch and this helped a little bit. Recently we noticed that the drawer to put the washing powder was in was hitting the door frame and chalked that up to a gremlin. Well we had another issue and had to pull the units out. Turns out they were not secured in any kind of way & the units were walking in the closet. Does anyone know the proper way to secure the stackable unit? if that would be done it would have to help a lot. Thanks for any help.

[clsfly]

There are brackets specifically for RV washers that screw to the floor and the adjusting leg fit inside the bracket to secure in place. Did they use the bracket to secure the dryer to the washer? You can get the brackets on Amazon

[Yoda]

Amazon also carries Z braces that you can attache to the back and side. Some you cut and drill to fit.

https://www.amazon.com/s?k=z+angle&c...nb_sb_ss_i_3_8
https://www.amazon.com/Aluminum-Bar-...s%2C213&sr=8-5
https://www.amazon.com/Geesatis-Shap...s%2C213&sr=8-6

Hope this helps

[hdsrob]

The mounting kit for the washer:
https://www.amazon.com/gp/product/B00A16MZO2/
As clsfly pointed out, you extend the back legs all the way, then level with the front legs and screw those over the front feet,


The stacking kit:
https://www.amazon.com/Trailer-Campe...dp/B004BC4CAC/

I didn't use the stacking kit (the washer and dryer in our fifth wheel are on opposite sides of the closet), but the instructions are on the Splendide site: http://www.splendide.com/accessories.htm