Background: Was having some intermittent problems with my early model (oem) Furrion Rear Observation Camera and (long story) replaced the 7 pin female connector that goes from RV to TV. Everything works now with exception of the RV left turn signal. I checked the red wire and rechecked the connections to the other 6 pins and can’t find anything out of the ordinary. My solder job is not pretty but everything looks like it’s in its own lane. FWIW: 1) all lights on TV are working properly. 2) running lights on RV are all illuminated when TV headlights come on. 3) as mentioned, left turn signal on RV does not flash whether when asked via left turn lever of TV nor when TV Emgncy lights are activated. Nor when TV brakes are applied.
I have minimal skills regarding proper use of electrical testing tools however I’ll take any advice and give it the ole college try. Just in case, I have another new 7 pin plug in standby as well as a new complete trailer cable with 7 pin and junction box, just in case. All suggestions greatly appreciated.
I have minimal skills regarding proper use of electrical testing tools however I’ll take any advice and give it the ole college try. Just in case, I have another new 7 pin plug in standby as well as a new complete trailer cable with 7 pin and junction box, just in case. All suggestions greatly appreciated.
Comment