Wondering if anyone has replaced the OEM faucet in the bathroom of any Imagine models? I suspect, but not sure, that the sink in the bathroom is probably the same or close to the same size in all Imagine models. I could be wrong about that, but in any case, If anyone here has replaced the OEM faucet with a taller and / or goose neck style faucet, I'd like to get your experience regarding the difficulty level, make/model info, place of purchase, etc. Send via PM is necessary. Any/All inputs, tips, etc are much appreciated. Thank you.
Announcement
Collapse
No announcement yet.
Goose Neck Faucet
Collapse
X
-
I replaced mine with a moen from menards i needed a pex cutter , 2 sharkbite shutoff valves and 2 supply lines. It is a little tight in the cabinet to do the work but doable I have a Reflection 337 and the cabinet is not very wide. The pex pipe went straight to the faucet that is why I put in the shut offs and supply lines.
- Likes 2
-
Agreed that any standard 4" centres faucet will fit. You might have to adapt the feed lines as described (with standard parts available at any plumbing store).
BTW . . .canada1975 must be shopping in the US . . . no Menards in Canada ๐.
RobCate & Rob
(with Border Collies Molly & Angel + Kitties Hazel & Elsie)
2015 Reflection 303RLS
2022 F350 Diesel CC SB SRW Lariat
Bayham, Ontario, Canada
- Likes 1
Comment
-
Thank you both. I'll get a 4" on center model and take a look at the feed line situation, with any luck it may not be a problem as you both have the Reflection and mine is the Imagine. Time will tell, thanks again to you both. Travel Safe!Dave and Sue
2020 GD 2250RK
2019 F-150 XLT, 5.0, 4WD, SB
Curt 17500 WDH, 3.55
GY Endurance, Dexter EZ Flex
SCPO(SW) USN, (Ret), HP: Tampa Bay โ๏ธ๐บ๐ธ
Comment
Comment