Goose Neck Faucet

[Schiefswret]

Wondering if anyone has replaced the OEM faucet in the bathroom of any Imagine models? I suspect, but not sure, that the sink in the bathroom is probably the same or close to the same size in all Imagine models. I could be wrong about that, but in any case, If anyone here has replaced the OEM faucet with a taller and / or goose neck style faucet, I'd like to get your experience regarding the difficulty level, make/model info, place of purchase, etc. Send via PM is necessary. Any/All inputs, tips, etc are much appreciated. Thank you.

[canada1975@sbcglobal.net]

I replaced mine with a moen from menards i needed a pex cutter , 2 sharkbite shutoff valves and 2 supply lines. It is a little tight in the cabinet to do the work but doable I have a Reflection 337 and the cabinet is not very wide. The pex pipe went straight to the faucet that is why I put in the shut offs and supply lines.

[Schiefswret]

canada1975: thank you. any chance you still have access to the moen model number? it may be avail here in US from HD or Lowes.

[canada1975@sbcglobal.net]

I am away from home until tomorrow evening I can look then but any bathroom faucet with four inch centers on the connections should work, I do remember it cost $65.00

[Cate&Rob]

Agreed that any standard 4" centres faucet will fit. You might have to adapt the feed lines as described (with standard parts available at any plumbing store).
BTW . . .canada1975 must be shopping in the US . . . no Menards in Canada 😀.

Rob

[Schiefswret]

Thank you both. I'll get a 4" on center model and take a look at the feed line situation, with any luck it may not be a problem as you both have the Reflection and mine is the Imagine. Time will tell, thanks again to you both. Travel Safe!

[canada1975@sbcglobal.net]

Yes i shop in the USA I live in Illinois my last name is Canada. The model faucet I bought was Hilliard 84532srn

[Schiefswret]

thank you Canada!

[Schiefswret]

Bless you and all those whos last name is America!