We are taking our new Reflection 337RLS out one more time at the end of OCT. before winterizing. Has anyone installed the bypass kit at the pump on theirs? How did it work ? and where is the pump located?
Announcement
Collapse
No announcement yet.
Winterizing new 2020 337RLS
Collapse
X
-
Originally posted by Bob Pachinger View PostWe are taking our new Reflection 337RLS out one more time at the end of OCT. before winterizing. Has anyone installed the bypass kit at the pump on theirs? How did it work ? and where is the pump located?
RobCate & Rob
(with Border Collies Molly & Angel + Kitties Hazel & Elsie)
2015 Reflection 303RLS
2022 F350 Diesel CC SB SRW Lariat
Bayham, Ontario, Canada
-
Originally posted by Cate&Rob View Post
If you are talking about the water heater bypass, it is built into the nautilus panel. I am not sure what you are asking with "the bypass kit at the pump". The pump is located behind the aft wall of the pass through storage, behind the water selection panel.
Rob
I just watched the video That GDRVEmily linked, That cleared up a lot, pretty easy it seems.Last edited by Bob P; 10-10-2019, 01:47 PM.Bob P.
2018 F-350 CCLB 4X4 Dually
2020 337RLS
VIN last 8 L3326309
Comment
-
Bob
You can use a short piece of garden hose. I cut a piece off of an old garden hose that I only use for this purpose. I made it about 3 feet long. I pour 3 gallon bottles of antifreeze into a 5 gallon bucket. I install the hose into the Nautilus panel and insert the other end into the bucket. I set the bucket on the tray beside the panel and go inside and turn on the pump and then start turning on each valve , one at a time , until all will flow the antifreeze. I use the 5 gallon bucket so I do not have to go out and switch jugs all of the time.
BrianBrian & Michelle
2018 Reflection 29RS
2022 Chevy 3500HD
- Likes 1
Comment
Comment