This was inspired from TucsonJim on the thread: https://gdrvowners.com/forum/operati...flow-revisited
I prefer ball valves and purchased one from Lowe's that is a SharkBite 1/2" valve. The other side did not really matter as it just spills out from there and is not connected to anything.
Remember: Open the valve when filling the fresh tank to allow it to spill out and pressure not to build....then close back when finished to prevent tank spillage into the overflow line.
I prefer ball valves and purchased one from Lowe's that is a SharkBite 1/2" valve. The other side did not really matter as it just spills out from there and is not connected to anything.
Remember: Open the valve when filling the fresh tank to allow it to spill out and pressure not to build....then close back when finished to prevent tank spillage into the overflow line.
Comment