I just took delivery of a 2020 Imagine 2450RL on 05 May. After doing much research, I took delivery prepared with a series of questions to ask the RV technician. He could not tell me where the Schwintek slide controller was located on the unit. We both looked for it (inside cabinetry/storage, etc...) and could not locate it. Would anybody know where it is located, in the event I need to do an override to move the slide. Any suggestions on where to look would be appreciated as well. Thank You
Announcement
Collapse
No announcement yet.
Schwintek slide controller location
Collapse
X
-
Originally posted by Moe View PostI just took delivery of a 2020 Imagine 2450RL on 05 May. After doing much research, I took delivery prepared with a series of questions to ask the RV technician. He could not tell me where the Schwintek slide controller was located on the unit. We both looked for it (inside cabinetry/storage, etc...) and could not locate it. Would anybody know where it is located, in the event I need to do an override to move the slide. Any suggestions on where to look would be appreciated as well. Thank You
not sure of location but I’m sure someone here will chime in with that info. Link above is complete guide to override, reset, etc.
Good Luck.Dave and Sue
2020 GD 2250RK
2019 F-150 XLT, 5.0, 4WD, SB
Curt 17500 WDH, 3.55
GY Endurance, Dexter EZ Flex
SCPO(SW) USN, (Ret), HP: Tampa Bay ⚓️🇺🇸
-
Moe
Hi Moe,
Not sure if this will help, because we have a Reflection, but our Schwintek controller is overhead in the pass through storage area, behind a molded black plastic cover.
RobCate & Rob
(with Border Collies Molly & Angel + Kitties Hazel & Elsie)
2015 Reflection 303RLS
2022 F350 Diesel CC SB SRW Lariat
Bayham, Ontario, Canada
Comment
-
Originally posted by MidwestCamper View PostImagine 2600RB controller is located behind a panel on the left side below the bathroom vanity. Not sure this would apply to all Imagines.
Jim
NormNorm & Karla
2019 Imagine 2150rb
2018 Chevrolet Silverado 2500HD
2016 - 2018 Hobie Kayaks
- Likes 1
Comment
-
No big surprise ... it's always in the last place you look. With help from GD's Robert Loomis, the Schwintek slide controller in the Imagine 2450RL is located underneath the pots and pans drawer, screwed to the floor. (to avoid water damage, I would have been tempted to install it on the inside of a cabinet wall, off the floor... not enough wiring to move it now... fingers crossed). Thanks everyone for helping out with tips and suggestions. CheersMoe & Donna
2020 Imagine 2450RL
- Likes 6
Comment
Comment