slides sound like they are going to tear a hole in the wall in and out. I don’t think they were installed correctly. They are not going to last at this rate. One week use in and out 10 times. I cringe every time I hit the switch. Kitchen slide bounces a bit, up and down side to side. I am really regretting this purchase
Announcement
Collapse
No announcement yet.
Crunch crunch crunch
Collapse
X
-
After a couple of trips I took ours in for a couple of minor things. One of them was the kitchen slide was making an load noise and I thought it was going to mess something up. When showing the service department the slide didn`t move out pass a foot and it made a horrible sound. Picked it up and it sounded like one comes to expect. They told me it just needed lubing that all the adjustment where fine. Works now and I checked under the slide and found where they lubed the rod. the rod was dry when I checked everything before I took it in. Hope that is all that is needed for yours.
Comment
-
There are three different types of slide outs installed in GDRV units. Hydraulic, Schwintek, and Lippert through frame.
Which type of slides are you dealing with? Have you lubricated them? It makes a huge difference in noise on mine when they are dry.
JimJim and Ginnie
2024 Solitude 310GK
GDRV Technical Forum Moderator
GDRV Rally Support Coordinator
Comment
-
Not what type slide you have but I have a 3150 Imagine and I had similar issues with my main slide. I went to the Dealer thinking all kinds of bad thoughts .
After a short talk with the Service manager, he gave me a can of spray lubricant and told me exactly how to use it. To make a long story short, my slide now works smooth and quiet. I have Schwintek slides and the lubricant is critical. .
Comment
Comment