Disclaimer: In general, this forum is intended to be a place for Grand Design owners to gather and exchange ideas regarding their use of and experiences with Grand Design products. Any information contained in the forum should be independently verified by checking with Grand Design, one of its authorized dealers, or reviewing your owner’s manual.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You will need to to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below. Thanks for visiting and your interest in Grand Design!
I have the problem where one Wet Bolt won't take any grease. I have taking the weight of the spring by jacking the trailer up and down, I then changed the Zerk and repeated... NO LUCK - I called my Dealer and they were not help, ie.... didn't know the part numbers and said it would be at least a couple of weeks to get a Bolt assembly.
Does anyone know the Part Number(s) ? I have a 2020 381M Momentum (Triple Axle with Equa-flex)?
Do I replace just the one bolt or do I have to replace it as a pair?
I went onto the GD parts look up but I can't read the part numbers of the drawing.
Please Help I am leaving for 3 months on July 6th .
You can reuse the bolt if it is in good shape. You will have to remove it to replace it so you can inspect and clean the grease passage and align the side hole to either 3 or 9 o clock. You will need to replace the nut , these are not reusable.
Brian
Brian & Michelle
2018 Reflection 29RS
2022 Chevy 3500HD
Comment