Hi all, I wanted to get some feedback before I contact GD customer service about what I think is improper routing of the propane line under my unit. I will let the pictures speak for themselves but as you can see the main line that feeds the distribution block for some reason has a very sharp bend (almost a fold) in it for whatever reason and is obviously straining the line and appears to be partially kinking it. So far all of the appliances upstream of this kink (stove top/oven, HW heater and fridge) appear to be working without issue. However, I am concerned with the longterm integrity of this line due to the strain on it. Also, it does create a low point concern as well as it hangs below the frame rails and could potentially get caught on something as a result....
Would like to hear some feedback from you on whether my concerns are warranted or if this is completely normal in your mid.
Would like to hear some feedback from you on whether my concerns are warranted or if this is completely normal in your mid.
Comment