Tweet
I have the basic solar setup on this coach with one panel (assume the 165W Furrion panel (although thats a guess as i got no docs related to the panel) and the Furrion 50 AMP charge controller. I have 3 additional 170W panels that i would like to add in series/parallel. Specs on the 170 panels and the 165 are very close. Ballpark looks like i will end up with close to 680 Watts, 20A and 40V, well in line with leveraging the stock 10G solar cables already installed. However looking at the controller docs they state the max PV watts are 600. So the question is, do i have an issue using 4 panels with this charge controller??
- Disclaimer: In general, this forum is intended to be a place for Grand Design owners to gather and exchange ideas regarding their use of and experiences with Grand Design products. Any information contained in the forum should be independently verified by checking with Grand Design, one of its authorized dealers, or reviewing your owner’s manual. If this is your first visit, be sure to check out the FAQ by clicking the link above. You will need to to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. Thanks for visiting and your interest in Grand Design!