Hi there! First time posting so hopefully this makes sense. We have a 2021 21BHE and are installing 800w solar panels, 3000w pure sine inverter, 60A solar charge controller, and 400ah LiFePo4 batteries (to be 800ah by EOY). We have a different setup in our trailer as we modified most of the door side of the trailer and the bunk area is an office now. We are FT IT and are on the road 80% of the time. Because we have modified our trailer, we don’t use the side dressers/closets for clothes. We’d used them for linen storage, hiking gear, etc. When we decided to do Solar, we decided to use the inside dresser/closet as a solar server closet, if you will. We have the Solar charge controller, bus bar/distributor, the inverter, and all the wiring primarily in the closet. Because of this, I’d like to cut down the length of the wires from the roof and have it come directly into our Solar cabinet. We just don’t want to pull off every panel in the trailer to find it.
Does anyone know if it’s in the wiring that leads to the TV or where it goes down along the trailer and if it passes by the closet there? We don’t want to run 20’ of wire when all we need is 3’.
Does anyone know if it’s in the wiring that leads to the TV or where it goes down along the trailer and if it passes by the closet there? We don’t want to run 20’ of wire when all we need is 3’.
Comment