bertschb
Member
Last Activity: Today, 10:31 PM
Joined: 06-05-2019
Location: Bend, OR and Palm Springs, CA
-
I'll have my eyes peeled for firmware updates and will share if I see something Howard.... -
As mentioned in a previous post, Victron Connect only shows loads on one leg with the new Multiplus II 2x120. I asked for more details on this in the...Leave a comment:
-
..and this software developer has no idea what anybody in this thread was talking about. Well, except for the first couple of posts...Leave a comment:
-
That's a good reminder Howard. The good news is we're heading back to Oregon soon where A/C won't be needed until August :-)
I did read your...Last edited by bertschb; 04-12-2021, 10:58 AM.Leave a comment:
-
Some random observations from testing my system today...
I charged the batteries up, shut off shore power and started the front A/C at 11:00AM....Leave a comment:
-
Not quite done cleaning up the wiring but here is my new system:
...Leave a comment:
-
The cool thing for me Howard is the ability to power both legs while inverting. No need for a manual switch or the AM Solar Smart Phase Selector. Although...Leave a comment:
-
I think you're right. I unplugged shore power this morning to test the inverter. Each time I added a load, the UI appeared to report it correctly....Leave a comment:
-
howson
I've tried to find a way to display each leg independently but I haven't figured out how to do that. But in looking at this further,...Leave a comment:
-
Correct. "PE" is ground by the way....Leave a comment:
-
Here is a picture of the bottom of the new Multiplus II. If you look at AC-IN, you'll see connections for L1 and L2. I misspoke in my earlier post by...
Leave a comment:
-
I'm not sure if it can show both legs for the load. I'll fiddle with that.
As for pics of the wiring - it's simple. You just run your 6/4...Leave a comment:
-
It's mesmerizing...
...Leave a comment:
-
OK, I figured it out. I had to go into the Remote Control panel and actually choose the name for AC Input 1. I chose "Shore Power". Everything...
Leave a comment:
-
Update-
I got the new Multiplus II 12v inverter installed and everything seems to be working fine. I have AC power to the RV. BUT, Victron...Leave a comment:
-
Hi Jim
I went with the 63amp breaker because that's what the guy who's blog I'm following used. It's just a disconnect and I think he chose...Leave a comment:
-
Got my (temporary 32a) replacement circuit breaker today and it actually works! I still can't believe the original was defective.Leave a comment:
-
Hi Dan
The DC DIN rail mini breaker I'm using as a disconnect is for the solar system I'm building. It's not an OEM part so Grand Design...Leave a comment:
-
Hi Keith
We're in Palm Springs. I ended up ordering two breakers just in case the one I want arrives after we leave here. One is the replacement...Leave a comment:
-
Thanks for confirming that Jim. I've ordered a replacement breaker but it looks like I'll have to wait another couple weeks for it to arrive. This build...Leave a comment:
No activity results to display
Leave a comment: