RoyB
Member
Last Activity: Today, 09:05 AM
Joined: 11-19-2020
Location:
-
I don't know if it was me. The 351M already offered it per my earlier posts. I would surely had paid to upgrade on the 320G at the time of ordering... -
It appears to be mandatory across the line now on the 320G. Yesterday I built my same optioned camper on their website and the 17.5s were mandatory even...Leave a comment:
-
17.5 is still shorter than the 16s, but not substantially. I wonder if it's because of the 8K lb axle option they started offering.
The...Leave a comment:
-
They also make a very hand multi-nut driver as well. Very small form factor.
https://www.kleintools.com/catalog/m...-nut-drivers/7...Leave a comment:
-
WHOA wait a minute. What size wheels came on your rig? My tire size is 235/80-16 and that's what came on it. Unless you have 17", those are way...
Leave a comment:
-
I believe I went with the OEM Mopar setup which looks the same as the Curt. The B&W looks nice but it's too tall imo. According to the level system...
Leave a comment:
-
Heres a link to my fans: Fridge fix when not cooling (Norcold 1210) - Grand Design Owners Forums (gdrvowners.com)
I replaced the 2 that were...Leave a comment:
-
I am not sure what octane the Onan is designed to run at. I have been putting 91 in this weekend (highest avail). It's 100 degrees out and I am working...Leave a comment:
-
I did it at the RV dealer when picking mine up. Just the wife and I. Set it up on the tailgate as you did and got a couple bolts started and it wasn't...Leave a comment:
-
I have the airbags on my Ram as well. If I had to do it again I would not get them. They are brutally harsh when driving unladen. I would go aftermarket...Leave a comment:
-
I like it. I don't have any experience with a typical 5th wheel so I Can't really give a comparison. It's super smooth, no chucking I hear about with...Leave a comment:
-
Well I might be in the clear. After filling the airbags up and raising the front a little, the generator seems to be running good again. 7 hours so...Leave a comment:
-
Thanks for the quick replies! I didn't even look under the generator. The hard line saw must be the fuel filter. There are 3 auto stores within a block...Leave a comment:
-
Keep me updated. I run a Reese Goosebox since new fwiw....Leave a comment:
-
Any idea where the fuel filter is? I see the fuel line, it appears to go into a hard line from the base of the generator. FWIW I am not sure how a clogged...Leave a comment:
-
I know I am late to reply, but I ended up selling my 2500 late 2020 and building a new 3500. The 3500 came in spring 2021. We didn't get out a whole...Leave a comment:
-
Onan 5500 run issues
Could use some help troubleshooting my generator issue. Unit is late 2019, and never used the generator much since we always had 50A hookups. I'd run...
No activity results to display
Leave a comment: