To Complement Howard's thread https://gdrvowners.com/towing-and-hi...rd-f-350-8-bed
I will cover another option here - BullRing anchors https://www.bullringusa.com USA made and I had them on my previous 04 F350 and the did very well. I got the extended angle version, They have models for all trucks, including some of the Fords with offset stake pockets
Instructions are straight forward. Remove the screw, tilt and insert into stake pocket, and be sure the stainless steel C clip engages both pockets lips. Then reinsert screw while holding in place and tighten. Took me all of 15 minutes to do all 6.
Unit as cam out of box. Screw partially removed.
BullRing, screw removed and expanded for insertion. Note the heavy duty stainless steel C clip.
Inserted and screw installed. Good fit.
On side completed
I bought them direct from BullRing as they were actually cheaper from them. As I got 3 - pairs shipping was free and Fast.
Hope this helps folks
Keith
BTW if anyone needs a spare stake pocket cover PM me - Free
And yes my truck is already dirty from the dust storms we have been having
On edit This is the model I used for my truck. Part number is 4054 Ford Flush Fit Angled Retractable Tie Down Anchors | 2015+ F150 | 2017+ Super Duty | 2017+ Raptor | #4045
I will cover another option here - BullRing anchors https://www.bullringusa.com USA made and I had them on my previous 04 F350 and the did very well. I got the extended angle version, They have models for all trucks, including some of the Fords with offset stake pockets
Instructions are straight forward. Remove the screw, tilt and insert into stake pocket, and be sure the stainless steel C clip engages both pockets lips. Then reinsert screw while holding in place and tighten. Took me all of 15 minutes to do all 6.
Unit as cam out of box. Screw partially removed.
BullRing, screw removed and expanded for insertion. Note the heavy duty stainless steel C clip.
Inserted and screw installed. Good fit.
On side completed
I bought them direct from BullRing as they were actually cheaper from them. As I got 3 - pairs shipping was free and Fast.
Hope this helps folks
Keith
BTW if anyone needs a spare stake pocket cover PM me - Free
And yes my truck is already dirty from the dust storms we have been having
On edit This is the model I used for my truck. Part number is 4054 Ford Flush Fit Angled Retractable Tie Down Anchors | 2015+ F150 | 2017+ Super Duty | 2017+ Raptor | #4045
Comment