Dropping Kitchen Grey Tank 2014 Reflection 337RLS

[Cemac5]

Hello,

Looking for guidance on dropping a kitchen grey tank on a 2014 337RLS. The leak only happens when the tank is almost or full and runs out around the top area. GD gave me two part numbers but does not know which one. (320011 or 320012) It may be a two piece tank that cracked at the seam. Does anyone have a procedure for dropping a grey tank? Just would like to know what to look out for.

Thanks
Craig

[Cate&Rob]

Hi Craig,

Dropping the kitchen grey is relatively complicated process. The tank is crosswise over the front axle. The sink drain goes in under the island and the vent is behind the electrical panel or accessed through the pass through storage. You are going to have to access these connections to put the tank back in, so I would start by looking for the leak in these locations. To drop the tank, the underbelly coroplast will have to be dropped from the front back to the axles. The tank is “T” shaped and hanging on removable rails. There might be auxiliary straps under the tank . . . but, probably not in 2014.

Rob