If you have a Momentum, Imagine XLS 17MKE, 19BWE, 21BHE, 24MPR or a Transcend 247BH that was built between 7/1/19 and 9/1/19 the Roll Over Couch may be missing a stop bolt. If the stop bolt is not in place, the back rest portion can tip below "level" when converted into a bed.
The fix is simple--install an 8mm-1.25 x 12 8.8HCS Z bolt (2 each) with M8-1.25 DIN985 locking nuts. The Grand Design part numbers are 882305 and 682306, respectfully.
Below are pictures showing where the bolt may be missing and what it looks like with the bolt (and nut) installed.
If you have a question, contact your dealer and reference Technical Service Bulletin 19-005. You can always call Grand Design Customer Service, too, at 574-825-9679.
The fix is simple--install an 8mm-1.25 x 12 8.8HCS Z bolt (2 each) with M8-1.25 DIN985 locking nuts. The Grand Design part numbers are 882305 and 682306, respectfully.
Below are pictures showing where the bolt may be missing and what it looks like with the bolt (and nut) installed.
If you have a question, contact your dealer and reference Technical Service Bulletin 19-005. You can always call Grand Design Customer Service, too, at 574-825-9679.
Comment