Hey team, first-time post for me. My 2018 ST344GK has 2 controller pads for the jacks, one in the lower compartment and one (the more complete controller) inside the control panel cabinet. The interior control pad seems to have lost power (or will not come on at all) while the pad in the lower compartment is working fine. It even re-leveled the RV on-demand, so the system is working. I am only aware of the 10-amp fuse inside the controls area...is there another fuse I need to replace?
Announcement
Collapse
No announcement yet.
2018 ST344GK Interior Level Control Pad has no power
Collapse
X
-
Originally posted by Bubba72802 View PostHey team, first-time post for me. My 2018 ST344GK has 2 controller pads for the jacks, one in the lower compartment and one (the more complete controller) inside the control panel cabinet. The interior control pad seems to have lost power (or will not come on at all) while the pad in the lower compartment is working fine. It even re-leveled the RV on-demand, so the system is working. I am only aware of the 10-amp fuse inside the controls area...is there another fuse I need to replace?
Last edited by howson; 02-02-2021, 08:06 AM.Forum moderators are not GD employees--we are volunteers and owners presumably just like yourself. Unless specifically mentioned otherwise, we have nothing to gain should you choose to purchase a product or engage a service we discuss on this forum.
Howard & Francine
2017 Ford F-350 DRW, '19 315RLTSPlus
-
Bubba72802
I may have confused the travel trailer Ground Control with the 5vr Level Up. Can you post pics of the control panels, please?Forum moderators are not GD employees--we are volunteers and owners presumably just like yourself. Unless specifically mentioned otherwise, we have nothing to gain should you choose to purchase a product or engage a service we discuss on this forum.
Howard & Francine
2017 Ford F-350 DRW, '19 315RLTSPlus
Comment
-
Originally posted by Bubba72802 View PostHowson your pictures are correct, as well as your understanding of my problem.
I believe the overall system you have is Lippert's Level-Up With OneControl Touch Panel. It's this one per the Parts Lookup website: https://www.granddesignrv.com/owner-...s/detail/36788 LCI's support documentation (where I got the diagrams below) is here: https://support.lci1.com/towable-br-...vel-up-br-octp
This next diagram is not your system, it's the electric jack configuration (yours is hydraulic) but the OCTP-to-panel wiring should be similar. As you can see it is nothing more than one wire harness that plugs in to the control board from the OCTP.
The controller in your trailer should look like the one below. Note the "OCTP" connectors--that's where the panel that is not working should be plugged in. With all power disconnected from the trailer (including 12v), you might try reseating the panel's connector. (I don't know where the controller is located in your unit--sorry!)
Please be super careful when troubleshooting this system. If I was doing this work I'd assume the trailer would do all kinds of unanticipated movements when power is reapplied therefore I'd ensure nothing is below or connected to the trailer that might be crunched or harmed.
Please note that I have no practical experience with these hydraulic leveling units. All my knowledge comes from reading and watching maintenance videos.
Howard
Forum moderators are not GD employees--we are volunteers and owners presumably just like yourself. Unless specifically mentioned otherwise, we have nothing to gain should you choose to purchase a product or engage a service we discuss on this forum.
Howard & Francine
2017 Ford F-350 DRW, '19 315RLTSPlus
Comment
Comment