Disclaimer: In general, this forum is intended to be a place for Grand Design owners to gather and exchange ideas regarding their use of and experiences with Grand Design products. Any information contained in the forum should be independently verified by checking with Grand Design, one of its authorized dealers, or reviewing your owner’s manual.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You will need to to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below. Thanks for visiting and your interest in Grand Design!
We have an Atwood range in our Reflection 27RL and the oven door is no longer closing tight. I'm wondering if I sprung it somehow while trying to light the pilot but does anyone know if the door is adjustable and how to do it? Thank you in advance!
We have an Atwood range in our Reflection 27RL and the oven door is no longer closing tight. I'm wondering if I sprung it somehow while trying to light the pilot but does anyone know if the door is adjustable and how to do it? Thank you in advance!
Phyllis
Phyllis,
I don't have a direct answer for you (sorry!) but I did some googling to find out exactly what stove you have and found related literature.
The stove is an Atwood (now Dometic) RV-2135 BBP 52232 21 Inch 3 Burner Wedgewood Vision Range Oven Black Top Black Door Piezo Ignition
I couldn't find anything on Dometic's website, but did find the stove's manual elsewhere. I've attached a copy below.
Forum moderators are not GD employees--we are volunteers and owners presumably just like yourself. Unless specifically mentioned otherwise, we have nothing to gain should you choose to purchase a product or engage a service we discuss on this forum.
Howard & Francine
2017 Ford F-350 DRW, '19 315RLTSPlus
Hello. I had the same problem with my oven. After some investigation, I found that the slots on the door side were bulging out. I think this is for leaning on the door while lighting the pilot. I used a hammer and gently hammered the bulges back in place. I was more careful when lighting the pilot but it is still bending. I finally replaced the oven.
Thank you Howard for posting the manual and thank you canald for sharing your experience with the same problem. I'll check the hinges as you suggested and see if that's our problem.
Comment