How to remove the front glass - Twin Star fireplace

[d2reid]

Yep, I agree. That top trim needs to come off. It's hiding the set screws.

I'm assuming the installation is "built-in construction" (option 3).

Yup, option 3, built in.

[d2reid]

Job is almost done.

1. Pry the trim off gently. It is held on by three finishing nails, left side, right side and one in the middle. When mine came loose it popped the glass cover pretty good, didn't break, phew.



Remove the side retaining screws, then remove the restraining screws at the top now that you can get to them. The face just lifts off.



Remove the 8 screws in the hinges and slide the fireplace out.



It's balanced on the board below it so when you take the screws loose steady it so it doesn't fall over. I got my TV connection cables sorted out, the reason to get back in there. But now when I go to add another electrical outlet it will be easy for me to get in there.

I will pick up a few finishing nails and get the trim secured before we travel again.