Awning Lights come on when turning battery switch off

[315RLTSinPA]

From the factory there are several loads that are not controlled by the battery disconnect switch. If you want to kill everything, most people either install a master kill switch near the battery, or just pull the negative wire off the battery.

No need for another switch or disconnecting the negative wire. A few minutes with a test light and switching wires around and you can control what is turned off and what is hot with the factory disconnect.

[Nascen]

1 hour with a test light and the issue has been resolved. There is a electrical box in the tongue of the trailer. In the box are breakers and a bus bar. My mechanic and i tested all the lights and switches both in the panel and in the electrical box. A few wires were crossed everything works as it should now. I will document this better in a day or so.