I was thinking that the temperature reported by the OneControl and actual temperature was off by a bit.
I placed a thermometer adjacent to each wall sensor.
The panel reported a 4deg F higher temp than the independent thermometers.
Example: Main temp is about 74 from the OneControl. Other thermometers report about 69 deg F.
Has anyone found a way of "Calibrating" the OneControl for temperature?
Thanks.
Steve
I placed a thermometer adjacent to each wall sensor.
The panel reported a 4deg F higher temp than the independent thermometers.
Example: Main temp is about 74 from the OneControl. Other thermometers report about 69 deg F.
Has anyone found a way of "Calibrating" the OneControl for temperature?
Thanks.
Steve
Comment