AC temperature control / options

[pappcam]

Do you have a Furrion? If so, where was the sensor? In the plenum or in the thermostat?

No it's all Dometic. All the literature seems to say the sensor was in the thermostat and having a different thermostat operate correctly pretty well confirms that.

[northstar]

I have the same problem as a lot of others. The Furrion heating and cooling system will not operate correctly because the thermostat will not read the correct temperature. I read where some have replaced the controller with the Micro Air easy touch. I haven't been able to find out if this changes the location of the thermostat to the controller or not. Does anyone know if adding the Micro Air will solve the problems. I don't really need all the extra things like blue tooth. Would just like it to operate correctly.

[howson]

I have the same problem as a lot of others. The Furrion heating and cooling system will not operate correctly because the thermostat will not read the correct temperature. I read where some have replaced the controller with the Micro Air easy touch. I haven't been able to find out if this changes the location of the thermostat to the controller or not. Does anyone know if adding the Micro Air will solve the problems. I don't really need all the extra things like blue tooth. Would just like it to operate correctly.

See https://gdrvowners.com/forum/operati...ssue-yes-again

If the sensor is in the plenum (as shown in that thread) there are a few options.

https://gdrvowners.com/forum/operati...winch-p-n-tsrk

https://gdrvowners.com/forum/operati...ts-free-method

Finally, if your trailer is under warranty (or even if not) GD may send you a sensor relocation kit if you're willing to do the installation yourself.

Howard