As part of my "Down Under" and soft hose removal project, I removed my 315RLTS' water pump today. For many this is basic stuff, but it was new to me. The purpose of this thread is to document what I encountered so it (hopefully) helps another plumbing newb like me.
The pump is directly behind the Nautilus panel in my trailer. I'd replaced the side access panel during a different project (normally held on with Robertson screws) with velcro, so access from the side was easy.
As others have referenced in other conversations about "hidden fuses", there's a 10A fuse for the pump in the tangle of wires.
Based on what I found in the pump and filter, as discussed last fall on many winterization-type threads, IMO running anti-freeze through the pump should be a part of the winterization process.
Hope this helps someone. Any questions or comments...fire away.
Howard
The pump is directly behind the Nautilus panel in my trailer. I'd replaced the side access panel during a different project (normally held on with Robertson screws) with velcro, so access from the side was easy.
As others have referenced in other conversations about "hidden fuses", there's a 10A fuse for the pump in the tangle of wires.
Based on what I found in the pump and filter, as discussed last fall on many winterization-type threads, IMO running anti-freeze through the pump should be a part of the winterization process.
Hope this helps someone. Any questions or comments...fire away.
Howard
Comment