I wanted to add, I took a piece on 1/2" foam and wrapped it around the hitch ball then put a piece of 1'2" water line foam insulation in the top, I taped yellow tape around it to use as a aide in hitching. I now can put this on the ball of the truck back up till it just hits pin box and Im right over the connection of the Anderson hitch. My truck I cant see over the rear set to see alinement this works great if anyone has the same issues.
Announcement
Collapse
No announcement yet.
Is going w/ gooseneck hitch ball good idea
Collapse
X
-
Originally posted by Dennis66 View PostI wanted to add, I took a piece on 1/2" foam and wrapped it around the hitch ball then put a piece of 1'2" water line foam insulation in the top, I taped yellow tape around it to use as a aide in hitching. I now can put this on the ball of the truck back up till it just hits pin box and Im right over the connection of the Anderson hitch. My truck I cant see over the rear set to see alinement this works great if anyone has the same issues.
ThanksTom and Janice (also known as Richter on the “Other” forum)
First came the 18' Comfort bumper-pull, was great for 20 years.
Now a 2019 Reflection 303RLS, second air, double glass, table and chairs
2019 F350 Lariat 4x4 Crewcab with lots of goodies
Andersen aluminum with the puck system holding it all together
Cranberry Twp. PA, about 30 miles north of Pittsburgh
Comment
-
I'm thinking about a set of these: https://www.amazon.com/Camco-Magneti...s%2C309&sr=8-3Joseph
Tow Vehicle: 2024 GMC K3500 Denali Ultimate Diesel
Coach: 303RLS Delivered March 5, 2021
South of Houston Texas
Comment
-
Here is my setup, Just line this up when backing in till you hit the pin box and your good to go. This is just a sheet of 1/4" foam wrapped around the ball with tape. Once your lined up just pull it off the ball.2 Photos2021 Reflection 303RLS
2019 Ram 2500 short box 6.4 Hemi
Anderson ultimate hitch
Comment
-
Originally posted by Dennis66 View PostHere is my setup, Just line this up when backing in till you hit the pin box and your good to go. This is just a sheet of 1/4" foam wrapped around the ball with tape. Once your lined up just pull it off the ball.Charles and Susan
2021 Ram 3500 6.4 Hemi, 4x4 CCSB
Andersen Hitch
2021 Reflection 337rls
Comment
Comment