Originally posted by Randall kjose
View Post
From the 3rd pic it looks like you have an inverter prep only, no inverter. In the that picture it looks like black and blur romex. Blue is to the subpanel (if I remember correctly) and black is from the "inverter" breaker. It look like they are connected together. If you had an inverter, those would be plugged into an inverter.
If you can, can you take a pic of the area I squared (lower left area)? That will tell us if you indeed have an inverter or if just inverter prep.
If this is the case I think you're getting somewhere. Typically many outlets are all wired to the same breaker along the same romex string. I'm just guessing that all the outlets that are not working, are probably wired together along the same romex string.
You may need to pull your distribution panel to see what's going on behind it. Just a visual inspection to make sure there are no "loose ends" flopping around back there.
Also make sure all wired connections into the breakers are good (give them a little tug...there shouldn't be any movement).
Also, do you have an onboard generator (Cummins Onan under the bed)?
And, good job hunting down the water pump issue. I forgot there is another switch on the nautilus.
Comment