Wire to tap into for outside fan for Dometic RM1350SLMX refrigerator

[Timmer]

Like many have done, I plan on installing fans on my outside vents to move more air in order to maintain refrigerator temps. I have a Dometic RM1350SLMX. I'm looking to cut down on investigation time and see if anyone has a good idea on what wire to tap into for this? Either a continuously hot wire in that area or one that turns on with the fridge? The latter would be my preference. Thanks in advance for sharing your expertise!

[Yoda]

Check out this thread https://gdrvowners.com/forum/operati...tic-8cf-fridge
You can find power. First place is at the bottom - look for a white block. It should have constant 12V power. However what I did was wire my fans to come on with the stock fan, At the top of the fridge you will find a set of cooling fins. On the far right is a thermostat. Front connection should be constant hot. I wired to the rear so when the thermostat closes to fire the stock fan my Aux fans cone on.

Keith

[Scott'n'Wendy]

For another option, I wired mine in at the bottom t-block that Yoda alluded to. The reason for this was those little disc t-stats have failed on me before. So I wanted a separate control for the aux fans. You can then buy/attach/wire into an attic fan variable temp setting controller.
Something like this
https://www.amazon.com/Ventamatic-XX...s%2C351&sr=8-5

[Timmer]

Well, I completed my fan project. Here is the link - https://gdrvowners.com/forum/operati...or-fan-install