Foiled, I was! Drat. I thought I was going to be so clever...not today...
One of my "down under" projects is to re-route the Ford auxiliary camera and TPMS cable that runs from the rear of the camper all the way to the front, where's there is a separate connector that plugs in under the 7-pin on the truck. When I installed the cable I zip-tied it to the gas line running down the street side of the camper. Worked fine, but with the coroplast down I wanted to route it up inside.
On the rear of the camper I decided to try and find a way to run the cable inside of the back wall. I know there's a channel that runs vertically from the bottom to the top (for the marker light wires) and there's a horizontal channel that runs across the top (again, for the marker light wires). I took off the top left and took a peak. To my great disappointment the vertical channel is behind the horizontal channel. Where the marker wires go into the camper there isn't a clear, definitive "this is going to work" look to it so I decided the "juice wasn't worth the squeeze".
I'll still run the rest of the wire up under the coroplast and secure it appropriately. Just a little disappointed I couldn't get that wire in those channels.
Howard
One of my "down under" projects is to re-route the Ford auxiliary camera and TPMS cable that runs from the rear of the camper all the way to the front, where's there is a separate connector that plugs in under the 7-pin on the truck. When I installed the cable I zip-tied it to the gas line running down the street side of the camper. Worked fine, but with the coroplast down I wanted to route it up inside.
On the rear of the camper I decided to try and find a way to run the cable inside of the back wall. I know there's a channel that runs vertically from the bottom to the top (for the marker light wires) and there's a horizontal channel that runs across the top (again, for the marker light wires). I took off the top left and took a peak. To my great disappointment the vertical channel is behind the horizontal channel. Where the marker wires go into the camper there isn't a clear, definitive "this is going to work" look to it so I decided the "juice wasn't worth the squeeze".
I'll still run the rest of the wire up under the coroplast and secure it appropriately. Just a little disappointed I couldn't get that wire in those channels.
Howard
Comment