Hi all, I've been reading and viewing all the video's on installing an Inverter. I'm very interested in installing an inverter and have been doing some planning. I understand that the Inverter Prep works by having the 30 AMP circuit Inverter Main feeding the power back to the panel in the Inverter Return power the top half of my breaker box.. As I inspect my set up, I think they have the panel wired wrong. If I install the Inverter with this configuration, My Microwave will not run and my AC will be energized. I checked with a meter, when I trip the Inverter Feed breaker, I lose power on the AC and General Circuits. I don't plan on having enough juice to run the AC, but would like to have the Microwave work.
I called Grand Design and they said they couldn't help me and I need to take it back to the Dealer. I don't want to waste my time on something this simple and wanted to ask this group if anyone has a 2024 23LDE and can share how the order their breakers are installed? To me the simple fix is to swap the microwave breaker with the AC breaker. I tracked down the neutral wire as well and both will need to be rewired to the appropriate bus bar.
Thanks for your help and insight. I've enjoyed following the brain trust with this group.
Dave
I called Grand Design and they said they couldn't help me and I need to take it back to the Dealer. I don't want to waste my time on something this simple and wanted to ask this group if anyone has a 2024 23LDE and can share how the order their breakers are installed? To me the simple fix is to swap the microwave breaker with the AC breaker. I tracked down the neutral wire as well and both will need to be rewired to the appropriate bus bar.
Thanks for your help and insight. I've enjoyed following the brain trust with this group.
Dave
Comment