2021 303RLS I do not have any power to the backup camera port. Does anyone know how the wiring is run?
Announcement
Collapse
No announcement yet.
back up camera port not working
Collapse
X
-
Originally posted by JRW View Post2021 303RLS I do not have any power to the backup camera port. Does anyone know how the wiring is run?
HowardForum moderators are not GD employees--we are volunteers and owners presumably just like yourself. Unless specifically mentioned otherwise, we have nothing to gain should you choose to purchase a product or engage a service we discuss on this forum.
Howard & Francine
2017 Ford F-350 DRW, '19 315RLTSPlus
Comment
-
I am trouble-shooting the same problem. I have a 2021 Grand Design Imagine 22MLE pre-wired for rear camera. I purchased a Furrion Vision S "Vehicle Observation System" with hopes of seeing constant rear view, not just while backing up. The display comes on for a few seconds, turns black, then back on again. After trying this and that, we determined the problem is insufficient power. Yes, the running lights were on.
I called Grand Design service to inquire about the pre-wiring, and was surprised at the response. Sometime in 2019 or 2020, the camera wiring was changed. It HAD been wired to run as an observation camera, but "due to customer feedback" it was changed to back-up viewing ONLY because "constant use was causing the cameras to burn out."
Grand Design Customer Service advised that I take it back to the dealership to modify the wiring, but it seems they don't want to fully endorse this modification.
I expressed to GD that they should be clearer about the wiring of the camera system, what it will do and what it cannot do. I guess I'll get in the service line....
Comment
-
Originally posted by Jami99 View PostI am trouble-shooting the same problem. I have a 2021 Grand Design Imagine 22MLE pre-wired for rear camera. I purchased a Furrion Vision S "Vehicle Observation System" with hopes of seeing constant rear view, not just while backing up. The display comes on for a few seconds, turns black, then back on again. After trying this and that, we determined the problem is insufficient power. Yes, the running lights were on.
I called Grand Design service to inquire about the pre-wiring, and was surprised at the response. Sometime in 2019 or 2020, the camera wiring was changed. It HAD been wired to run as an observation camera, but "due to customer feedback" it was changed to back-up viewing ONLY because "constant use was causing the cameras to burn out."
Grand Design Customer Service advised that I take it back to the dealership to modify the wiring, but it seems they don't want to fully endorse this modification.
I expressed to GD that they should be clearer about the wiring of the camera system, what it will do and what it cannot do. I guess I'll get in the service line....
BrianBrian & Michelle
2018 Reflection 29RS
2022 Chevy 3500HD
Comment
Comment