Disclaimer: In general, this forum is intended to be a place for Grand Design owners to gather and exchange ideas regarding their use of and experiences with Grand Design products. Any information contained in the forum should be independently verified by checking with Grand Design, one of its authorized dealers, or reviewing your owner’s manual.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You will need to to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below. Thanks for visiting and your interest in Grand Design!
I am going to replace the NP with either an Anderson Valve, or one of my own design (all brass). My question is there one line to the fresh water tank for both filling & drawing, or are they separate. It looks like only one, but without dropping the bely & looking not sure.
2018 Solitude 310GK. Thanks
I am going to replace the NP with either an Anderson Valve, or one of my own design (all brass). My question is there one line to the fresh water tank for both filling & drawing, or are they separate. It looks like only one, but without dropping the bely & looking not sure.
2018 Solitude 310GK. Thanks
There is only one line going to the fresh tank, it fills and draws thru the same line depending on how the valves are set.
Brian
Brian & Michelle
2018 Reflection 29RS
2022 Chevy 3500HD
I am going to replace the NP with either an Anderson Valve, or one of my own design (all brass). My question is there one line to the fresh water tank for both filling & drawing, or are they separate. It looks like only one, but without dropping the bely & looking not sure.
2018 Solitude 310GK. Thanks
Forum moderators are not GD employees--we are volunteers and owners presumably just like yourself. Unless specifically mentioned otherwise, we have nothing to gain should you choose to purchase a product or engage a service we discuss on this forum.
Howard & Francine
2017 Ford F-350 DRW, '19 315RLTSPlus
Thanks for the info & the link. I have already studied his plumbing redo,& believe thats the way i’m going to go. Seems to be the simplest & cheapest! I have already replaced most of the flexible hose with pex, I just want to get rid of the plastic fittings & valves.
Comment