I just purchased a 23 Momentum 25G. I was getting ready to go out for the first time and was trying to sanitize the fresh water tank. The manual is very clear on how to do this, but it wouldn't work. The Nautilus P2.5 system seems to be different than most and had two port for normal water. The one on the left is labeled Winterize. The one on the right is labeled City Water Connection. To sanitize, it says to connect to the winterize port on the left with a hose and put the hose into a bucket with the chlorine solution. The green diverter valve on the left should be turned to the left and the blue diverter valve on the right should be facing down. The pump should be turned on and it is supposed to suck the chlorine solution into the fresh water tank. When I did this, I could not get any flow. If I turn the handles to the winterize position with both handles horizontal, it will pump the solution through the water lines in the trailer without a problem.
This same configuration is used if I need to add water to the tank when out dry camping, so I would like to figure out what I am doing wrong. The other posts that talk about sanitizing are for a different Nautilus system and don't seem to apply.
Has anyone else out there had this problem or been able to get this to work with the P2.5 system?
Thanks.
This same configuration is used if I need to add water to the tank when out dry camping, so I would like to figure out what I am doing wrong. The other posts that talk about sanitizing are for a different Nautilus system and don't seem to apply.
Has anyone else out there had this problem or been able to get this to work with the P2.5 system?
Thanks.
Comment