Low point drains

[ExBusDriver]

You will have to double check the line size, but I cut the threaded end adapters off the exposed lines, then added https://www.homedepot.com/p/SharkBit...28EP/300891988 putting the threaded ends back on JUST IN CASE something happened to the valve and I had to cap it.

In the mean time I also added https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 to them to keep the critters from stopping them up with dirt.

Thank You!

[ExBusDriver]

Everyone, thanks for sharing your knowledge with a new guy.

1- I was looking at the fresh water anti siphon/overflow pipes. (no plugs) The ones behind the axles.

2- I did finally find the drains forward of the axles (with plugs in them) behind the main gray/black drain pipe.


pictures

[HowardC]

Are the low point drain lines 3/4" thats what the link for the valves goes to?

[howson]

Are the low point drain lines 3/4" thats what the link for the valves goes to?

I doubt it. According to the Water Supply Plan (a GD drawing) for the 260RD...



Howard

[Jlawles2]

If you look the link will take you to a selection size:


I don't remember if the low points were /12 or 3/4. I have both as the low points are one size and the vent (one as I have the pre double tube vent) on the fresh tank was a different size.

[guest2]

Are the low point drain lines 3/4" thats what the link for the valves goes to?

Ours are 1/2 inch.
Rich

[TucsonJim]

On our 2024 Solitude:

Low Point Drains - 1/2"
Fresh tank overflow - 3/4"

Jim