So, we are the new owners of a 2021 Solitude 375RES-R and the first stop about 40 miles after picking up the new camper from the dealer I did a walk around and found the fresh water drain valve pull rod had become disconnected from the valve and had been dragging on the pavement for quite some time and had worn away the connector. GD and dealer were great and had a new one sent directly to me and I screwed it on.
First stop on the second trip with the new rod was dragging on the pavement again. Strike two.
So it appears that you have to really get under the camper with some plyers and torque this rod to the threaded valve connector to get a sufficient fit and I am contemplating using some of that low heat aluminum brazing rods to lock the rod to the valve.
Anyone else having these issues?
KW
First stop on the second trip with the new rod was dragging on the pavement again. Strike two.
So it appears that you have to really get under the camper with some plyers and torque this rod to the threaded valve connector to get a sufficient fit and I am contemplating using some of that low heat aluminum brazing rods to lock the rod to the valve.
Anyone else having these issues?
KW
Comment