Second trip out on our 2020 Reflection 260RD.
I can get cold water out of the faucets but I don’t get any hot water to pump thru. I can’t even hear the pump turn on. When filling the storage tank I opened the faucets to minimize air in the lines. I made sure the valves were set correctly when filling so it did NOT bypass the HW heater.
Cold pumps through fine but no hot.
How do I check to see if there is water in the HW tank? Why does the pump not come on when the hot water is turned on?
I turned off the HW tank as I’m afraid it will damage it if there is not sufficient water in it.
Thanks for any assistance.
I can get cold water out of the faucets but I don’t get any hot water to pump thru. I can’t even hear the pump turn on. When filling the storage tank I opened the faucets to minimize air in the lines. I made sure the valves were set correctly when filling so it did NOT bypass the HW heater.
Cold pumps through fine but no hot.
How do I check to see if there is water in the HW tank? Why does the pump not come on when the hot water is turned on?
I turned off the HW tank as I’m afraid it will damage it if there is not sufficient water in it.
Thanks for any assistance.
Comment