Macerator with 100% Duty Cycle

[Yoda]

howson Cate&Rob Jlawles2 ncitro

To solve the limiting factor of the hose diameter you could adapt the outlet port to accept a 1.5" cam lock fitting and go with a 1.5" lay flat hose that would be easy to store,
https://camlockdirect.com/?gclid=EAI...SAAEgIW9vD_BwE
https://www.amazon.com/s?k=1.5+hose&...sl_qbqpszfck_e

To go from the 3/4 to a 1" female and the the quick coupler you could use theses firings
https://www.jmesales.com/dixon-brass...emale-coupler/
https://www.grainger.com/product/DIX...-Adapter-6CLW5
Then you would need a 1" male to 1.5" male or female cam lock. Many ways to get there

I use lay flat hose for irrigation, so some are pressure rated and others not, so choose wisely.

Just a thought
Keith

[Yoda]

This one will run 20 minutes and comes set up for a 1.5" hose https://www.thetford.com/product/san...le-tank-buddy/
But its pricey.

[howson]

Yoda -- the SaniCon Turbo looks like what Cate&Rob has -- those hoses are huge compared to the Flojet's garden hose.

https://www.thetford.com/products/ev...ani-con-turbo/

[Cate&Rob]

Yoda howson

The Thetford Sanicon name sounded familiar . . . found the kit that I have (came with its own carrying case) on their parts page (no longer in production)
https://www.thetford.com/part/tank-buddy/ The newer versions would probably work as well or better than the version that I have.

Rob

[ThePowells]

Okay, I'll admit it. I used a 1 HP garbage disposal for a macerator. I had to push the waste up between 4-5 feet over 40 feet, so I put a 1 hp flow pump behind it. It took about 90 seconds to empty the black tank on my class C.. I was using 1" PVC for the lime to the septic.

[Yoda]

Okay, I'll admit it. I used a 1 HP garbage disposal for a macerator. I had to push the waste up between 4-5 feet over 40 feet, so I put a 1 hp flow pump behind it. It took about 90 seconds to empty the black tank on my class C.. I was using 1" PVC for the lime to the septic.

Jerry
I am curious. How did you hook up the garbage disposal to the dump fittings. Sounds like a good DIY project.

[ThePowells]

Yoda I used an adapter with the 90 degree sweep. https://www.etrailer.com/RV-Sewer-Ho.../F02-3112.html I put the bottom of the adapter into the top where it would seal to the sink. I used a black rubber dishwasher hose to go to the pump. I had to slim down the neck where it went into the top.