Had water on my bath and bedroom floor after doing a black tank flush thru the nautilus. After reading various posts, I have deduced it's the vacuum breaker up behind the shower faucets causing the issue. (water running down the wall behind the shower and into the floor)
I removed the breaker and ordered new from Amazon which I'll have tomorrow.
My question: After I removed the breaker, the "rattler" inside seems to move back and forth but if I apply air pressure to the inlet side with my thumb over the outlet, I can hear air escaping out the top of the breaker. I assume that's not right and potentially a bad breaker? (hence why I ordered new)
I wouldn't think I should ever have water escaping out the top of the breaker. When I pulled it right after doing a test flush to recreate my issue, it was wet under the top of the breaker.
Thanks
Terry
I removed the breaker and ordered new from Amazon which I'll have tomorrow.
My question: After I removed the breaker, the "rattler" inside seems to move back and forth but if I apply air pressure to the inlet side with my thumb over the outlet, I can hear air escaping out the top of the breaker. I assume that's not right and potentially a bad breaker? (hence why I ordered new)
I wouldn't think I should ever have water escaping out the top of the breaker. When I pulled it right after doing a test flush to recreate my issue, it was wet under the top of the breaker.
Thanks
Terry
Comment