At the end of the season last year, our slide out began having issues. We took it to the shop and they re-synchronized the motors. We tested it and put it away for the winter.
Now we're having the same issue. Both sides start moving, then one side will stop. After reading some of the discussions, and trying the double-pressing/single-pressing the extend/retract process several times, with no success, I decided to look for the slide controller and the "Slideout Override Access Hole." Unfortunately, I'm 0 for 3.
I would appreciate it if someone could tell me where the controller is located (I've already checked the obvious locations), and where the slideout access hole can be found.
Thank you!
Now we're having the same issue. Both sides start moving, then one side will stop. After reading some of the discussions, and trying the double-pressing/single-pressing the extend/retract process several times, with no success, I decided to look for the slide controller and the "Slideout Override Access Hole." Unfortunately, I'm 0 for 3.
I would appreciate it if someone could tell me where the controller is located (I've already checked the obvious locations), and where the slideout access hole can be found.
Thank you!
Comment