While recently installing Roadmaster shocks on our unit, we were going to use that opportunity to also install an X-Factor brace to our center hanger. It turns out that GD has done so much reinforcing of the hangers, that it is not possible to fit the X-Factor. The hanger is reinforced with V-shaped steel plate, and the frame above the hanger is reinforced with flat steel welded to the frame. The bracket of the X-Factor just wouldn't fit as intended flat against the hanger.
But even if it had, the fresh tank drain was sticking down thru the cloroplast right in the way of the cross brace. They couldn't have mounted that thing more in the way if they had tried!
So, now I have an X-Factor I can't use that is too heavy to return. Craigslist here I come.
But even if it had, the fresh tank drain was sticking down thru the cloroplast right in the way of the cross brace. They couldn't have mounted that thing more in the way if they had tried!
So, now I have an X-Factor I can't use that is too heavy to return. Craigslist here I come.
Comment