Hello, testing revealed about 1.5V in a pulsating pattern at left brake from brake controller, but only about a quarter of that at right brake. Power to right brake comes from left side after left side brake wires splice. Has anyone dealt with this situation? Do brake wires need to route through the axel or can they be secured to the outside of the axel?
Announcement
Collapse
No announcement yet.
Voltage drop from left to right brake across rear axel
Collapse
X
-
The cross axles wires are very light gauge. 18 . . . or maybe even smaller. Some (on this forum) have reported better right side brake performance by upsizing the cross axle wiring. These wires are loose inside the axle tube, so easy to fasten new wires to the existing and pull them through. No reason the wires couldn’t go on the outside of the axle tube if something happened to the pull through of the new wires.
RobCate & Rob
(with Border Collies Molly & Angel + Kitties Hazel & Elsie)
2015 Reflection 303RLS
2022 F350 Diesel CC SB SRW Lariat
Bayham, Ontario, Canada
Comment
Comment