So for reference, this is what I'm talking about:
https://gdrvowners.com/forum/propane...ropane-adapter
That being said, I finally got around to modifying the regulator.
But the one that my generator come's with has different threads!
Can you help me identify the threads?
Here's the exploded view:
I'm convinced the thread going into the regulator (thing on the left in the above photo) is 1/4 NPT Male. ( I have a QC connector that is 1/4 NPT that seems to screw in easily)
I have no idea what the male on the other side is. (Maybe 1/8th? https://www.freshwatersystems.com/bl...-type-and-pipe) It might be straight versus tapered
I'm pretty sure these are NPT (National Pipe Tapered) since there is pipe dope on both sides. (No O-rings, or flares to be found)
Close up pictures (sorry, I don't have a caliper):
Big Side:
Little side:
Tagging howson since you seemed to figure out which adaptors you needed with no issues.
https://gdrvowners.com/forum/propane...ropane-adapter
That being said, I finally got around to modifying the regulator.
But the one that my generator come's with has different threads!
Can you help me identify the threads?
Here's the exploded view:
I'm convinced the thread going into the regulator (thing on the left in the above photo) is 1/4 NPT Male. ( I have a QC connector that is 1/4 NPT that seems to screw in easily)
I have no idea what the male on the other side is. (Maybe 1/8th? https://www.freshwatersystems.com/bl...-type-and-pipe) It might be straight versus tapered
I'm pretty sure these are NPT (National Pipe Tapered) since there is pipe dope on both sides. (No O-rings, or flares to be found)
Close up pictures (sorry, I don't have a caliper):
Big Side:
Little side:
Tagging howson since you seemed to figure out which adaptors you needed with no issues.
Comment